Official customs seals and trader sealing

Find out if your goods need sealing

Use the following guidance to find more information about whether your goods need sealing:

• Check if you need to declare goods you bring into or take out of the UK
• European Commission Transit Manual
• UK Supplement to the Transit Manual

To find out more about the use of seals contact imports and exports: general enquiries.

Check official customs seals

An official customs seal is an indicative seal that a customs officer may apply to identify goods under customs control. It may be applied in addition to a trader’s commercial seal.

If you receive goods in the UK secured by an official customs seal, you must inform your local HMRC control office as soon as they arrive.

Unless you’re an authorised consignee, you must not remove an official seal without prior approval from customs. Unauthorised breakage or removal of an official seal during any part of the journey breaches customs law in both Great Britain (England, Scotland and Wales) and Northern Ireland.

Leghorn cableseal wire seal

The body is made of painted aluminium. It bears the words ‘Customs GB’ and a serial number.

The cable is made of steel wire, 1 millimetre in diameter and 180 millimetres long.

How to apply to use your own seals

YouUnder needcertain toconditions, applyyou formay HMRCbe authorisationauthorised to use your own seals.seals for securing goods under customs control. Seals provide an additional way to identify the consignment.

We’llYou givemust thisapply for authorisation ifunder weArticle agree233(4)(c) thatof youEU Regulation 952/13 and Articles 55 paragraph 1 (b) and 81 of the Common Transit Convention.

You will need to meet the necessaryconditions standards.of Article 39(a), (b) and (d) of EU Regulation 952/13 and Article 57 (2) of the Common Transit Convention. You are deemed as meeting these conditions if you’re an authorised economic operators (AEO).

You can apply to use your own seals.

How to meet the standards

If you’re authorised to use your own seals in place of official customs seals, you must:

• keep all seals and sealing equipment under lock, with the key being held by a responsible person of your company
• keep a permanent stock record which must be produced to a customs officer on request which shows the:
  • receipt
  • serial numbers
  • use of the seal
  • disposal of the seal
• regularly inspect and balance your seal stocks to prevent interference or substitution
• keep all defective and used seals available for inspection by customs
• agree how you will dispose of the seals with customs
• clearly show the marks and numbers of the seals on documents accompanying the goods
• apply or remove the seals yourself or allow only responsible employees you have authorised to act for you apply the seals

International standards

YourSeal sealrequirements willare meetset theout requirementsin ifArticle it301 conformsof to the InternationalUnion StandardCustoms No.Code 17712Implementing 2013Regulation ‘Freight(2015/2447). containersThese –requirements Mechanicalare Seals’

Thisassumed internationalto standardbe formet seals is recognised by allany Commonseal Transitthat Conventionconforms (CTC)to countries — this includes the UKInternational andStandard theNo EU,

It17712: is2013 also‘Freight recognisedcontainers by— customsMechanical authorities in other countries around the world.Seals’.

SomeSeals countrieswith insisthigh-security thatfeatures it should be used for allcontainerised consignmentstransports arrivingwhenever at their ports.possible.

TheCustoms customsshould authorities of a Common Transit Convention member country will accept the seals that have been approved by theEU customsmember authoritiesstates, of any other CTC country — unless they havespecifically informationstate that the particular seal is not suitable for customs purposes.otherwise.

UK standards

The seals must:

• remain intact and securely fastened in normal use
• be easy to check and recognise
• be made of a material that:
  • is resistant to accidental breakage
  • prevents undetectable falsification
  • leave traces of any breakage or removal that are visible to the naked eye
• be designed for single use or, if intended for multiple use, be designed so they can show a clear, individual identification mark each time they are used
• each show a permanent unique identifying mark and be serially numbered and used in sequence

Identification marks of seals must be impossible to falsify and difficult to reproduce.

The form and dimensions of the seals can vary depending on the method of sealing used. You must make sure that identification marks are easy to read no matter what the dimensions of the seal are.

Trader seals which are accepted by HMRC from 20 October 2023

The types of trader seal that we accept for control purposes fall into the following groups.

We also accept bar box seals used to secure aircraft bar boxes.

Group 1 — seals that can withstand a force of 1,000 kilograms

We accept the following seals:

• Acme Bolt seal
  
• Athelyn Ltd, Athlock 3.5mm Cable Seal
• Lockie Limited T/A JW Products 3.5 millimetre cable seal
• Mega Fortris cable lock 350
• Mega Fortris cable lock 500
• Mega Fortris container bolt lock
• Mega Fortris Klicker 2K bolt seal
• Mega Fortris Klicker bolt seal
• Megafortris MCLZ 500
• Mega Fortris Mega cable lock 350
• Mega Fortris Mega cable lock 500
• Oneseal Daneseal
• Universeal (UK) Ltd Locktainer 2020 SH Magnum

Group 2 — seals that can withstand a force of 250 kilograms

We accept the following seals:

• Mega Fortris cable seal MCLZ 250
• Oneseal 79-T06 Anti-spin
• Universeal Flexigrip 150M

Group 3 — other acceptable seals

We accept the following seals:

• Acme ‘T’ seal
• Mega Fortris Domino FL metal strip seal
• Mega Fortris Domino SP metal strip seal
• Mega Fortris Mega Twister SP
• Universeal Dickey Globe metal strip seal

If an incident happens when using an official customs seal or your own seal

If you discover a seal has been tampered with or broken on:

• your own premises, you should report the facts to your local control office
• a vehicle or container and there’s also extensive damage to the vehicle, container or goods, you should report to your nearest customs office immediately
• a vehicle or container in which you’re carrying goods under customs control, you should report to customs at your destination as soon as you arrive there

The customs officer may ask you to explain how any seal breakage and damage occurred.

In all cases of unauthorised seal breakage, you must get a customs officer’s permission before you remove or unload the goods originally secured by that seal.

If an accident or other incident occurs during the transport of the goods

You must notify customs of the accident or incident as soon as possible.

Whenever possible, you should get prior authorisation from customs to break seals or transfer goods from one vehicle to another.

An account of the incident must be noted on the transit declaration. The goods and the declaration must be presented to the nearest customs authority. When customs are content that the operation may continue, they will reseal the goods and endorse the declaration accordingly.

Your rights and obligations

Read the HMRC Charter to find out what you can expect from us and what we expect from you.