Change description : 2023-05-11 15:06:00: New guidance has replaced the previous section; ‘Notification of QPPV and PSMF details tothe MHRA by existing holders of UK marketing authorisations’. This guidance replaces the previous requirement to submit a Type IA(IN) variation and an accompanying eCTD sequence to make these changes. This has been simplified and only an update notification is required, there is no requirement to submit an eCTD sequence. [BrexitGuidance and regulation]
The following legal obligations apply to holders of UK marketing authorisations (MA). These include those that cover the whole of the UK, or are specific to Northern Ireland or to Great Britain (England, Wales and Scotland), including Great Britain MAs granted to allow unfettered access from Northern Ireland.
To operate a pharmacovigilance system for UK authorised products
To have an appropriately qualified person responsible for pharmacovigilance (QPPV) that resides and operates anywhere in the UK or in the EU/EEA and is responsible for the establishment and maintenance of the pharmacovigilance system for UK authorised products
To maintain and make available upon request a pharmacovigilance system master file (PSMF) that describes the pharmacovigilance system for UK authorised products. The PSMF must be accessible electronically from the UK at the same site at which reports of suspected adverse reactions may be accessed
Guidance on the QPPV for UK authorised products
For all UK MAs, including those that cover the whole of the UK or are specific to Northern Ireland or to Great Britain, the marketing authorisation holder (MAH) must have permanently and continuously at its disposal a QPPV who resides and operates anywhere in the UK or in the EU/EEA, and is responsible for the establishment and maintenance of the pharmacovigilance system (“the UK QPPV”). Where the QPPV is not in the UK, there will be a need for a national contact person for pharmacovigilance as set out below.
This is provided for by regulation 182 of the Human Medicines Regulations 2012 (as amended) (HMR).
For MAs that cover the whole of the UK or are specific to Northern Ireland, the legal requirements concerning the qualifications and responsibilities of the QPPV that are outlined in Article 10 of the Commission Implementing Regulation (EU) No 520/2012 (CIR) will remain unchanged.
For MAs that are specific to Great Britain, legal requirements concerning the qualifications and responsibilities of the QPPV are outlined in paragraph 10 of HMR Schedule 12A (inserted by the EU Exit Regulations 2019), which mirrors Article 10 of CIR.
There is no temporary exemption as to the requirement to have a QPPV who resides and operates in the UK or the EU/EEA and is responsible for the pharmacovigilance system for UK authorised products.
National contact person for pharmacovigilance
If you choose to establish a QPPV who resides and operates in the EU/EEA, you must nominate a national contact person for pharmacovigilance who resides and operates in the UK and reports to the QPPV. This individual should have access to the reports of suspected adverse reactions referred to in regulation 187 of the HMRs and the PSMF for UK authorised products. The individual should be able to facilitate responses to pharmacovigilance queries raised by the MHRA, including via inspections.
There will be a temporary exemption in place which allows you 12 months from 1 January 2021 to appoint a national contact person for pharmacovigilance that resides and operates in the UK.
Once the national contact person for pharmacovigilance has been appointed, their details should be notified to the MHRA via the MHRA Submissions Portal. You should follow the instructions for submitting these details. You should receive a confirmation by email immediately upon completion of the form.
There is no requirement to appoint a deputy for the UK national contact person for pharmacovigilance, but for periods of extended absence greater than one month (such as maternity leave, long-term sick leave, etc.), it is expected that another individual is assigned as the national contact person for pharmacovigilance and their details should be notified to the MHRA within two weeks of the change. In practice, this means editing the existing details of the national contact person for pharmacovigilance that are saved in the MHRA Submissions portal.
Guidance on the PSMF for UK authorised products
For all UK national MAs, including those that cover the whole of the UK or are specific to Northern Ireland or to Great Britain, the MAH must maintain, and make available upon request of the MHRA, a PSMF that describes the pharmacovigilance system for UK authorised products (‘the UK PSMF’).
PSMF accessibility in the UK
All UK PSMFs must be accessible electronically at the same point in the UK from which the reports of suspected adverse reactions referred to in regulation 187 of the HMRs are accessible. This requirement applies from 1 January 2021.
The PSMF needs to be permanently and immediately available for inspection at the stated location in the UK.
PSMF format, content and representation of pharmacovigilance systems
For MAs that cover the whole of the UK or are specific to Northern Ireland, the legal requirements concerning the format and content of the PSMF that are outlined in Chapter I of CIR will remain unchanged.
For MAs that are specific to Great Britain, legal requirements concerning the format and content of the PSMF are outlined in Part 1 of Schedule 12A of HMR, which mirrors Chapter I of CIR.
As the legal requirements concerning PSMF format and content are identical for MAs that cover the whole of the UK and Northern Ireland, and those that are specific to Great Britain, a single UK PSMF can be used for all UK authorised products. This is assuming that the pharmacovigilance system applied to all products is the same.
The UK PSMF must describe the global pharmacovigilance system and reflect the global availability of safety information for UK authorised products.
As per GVP Module II, there are different approaches to establishing a pharmacovigilance system. For example:
MAHs can establish more than one pharmacovigilance system
A pharmacovigilance system can be shared by several MAHs
The UK PSMF should be an accurate representation of the pharmacovigilance system that has been established and you must make sure that every pharmacovigilance system covering UK authorised products has been assigned a unique PSMF number by the MHRA.
How to request a UK PSMF number
All PSMFs that cover UK authorised products should be registered with the MHRA. You should request a unique UK PSMF number from the MHRA for each pharmacovigilance system that you are operating for UK authorised products. Where the pharmacovigilance system is shared by several MAHs, a single request for a UK PSMF number should be submitted to the MHRA.
A UK PSMF number can be requested via the MHRA Submissions Portal. You should follow the online instructions for requesting a UK PSMF number and you should receive the number by email immediately upon completion of the form. The address from which the PSMF can be electronically accessed must be in the UK. Your UK PSMF number will be invalidated if the address provided is not in the UK. Any submissions to the MHRA using an invalidated UK PSMF number will not be accepted.
The UK PSMF number will be sent to the UK QPPV email address as well as the email address you nominated on the UK PSMF number request form. If you have not received a confirmation email within three hours of submitting the form, please contact submissions@mhra.gov.uk. Please do not re-submit the form as this will cause delays in processing your request.
Once a UK PSMF number is assigned to a pharmacovigilance system it should remain unchanged, irrespective of how the system may change and evolve over time. You should not request a new UK PSMF number if there are changes to the pharmacovigilance system, including a change of UK QPPV.
You do not need to update the initial information that was provided in the online form at the time of requesting your UK PSMF number (e.g. QPPV telephone number, MAHs covered by the pharmacovigilance system, etc.). This information is solely for the purpose of generating and allocating a unique UK PSMF number at a specific point in time. You must maintain the pharmacovigilance system information for your UK licences via the submission of the appropriate variations to the MHRA. Guidance on this process is provided below.
Guidance for applicants for UK marketing authorisations
The material to accompany an application for a UK marketing authorisation includes a summary of the applicant’s pharmacovigilance system (SPS).
This must include the following elements:
proof that the applicant has at their disposal an appropriately qualified person responsible for pharmacovigilance who resides and operates in the EU or the UK,
the country (which must be either the UK or a Member State) in which the appropriately qualified person resides and carries out his or her tasks
the contact details of the appropriately qualified person
a statement signed by the applicant which says that they have the necessary means to fulfil the tasks and responsibilities listed in Part 11
a reference to the location where the pharmacovigilance system master file for the medicinal product can be accessed electronically, which must be in the UK
The SPS should also include the UK PSMF number.
The above is following HMR Schedule 8.
Guidance on the application process and on registering to make submissions via the MHRA Submissions Portal is available.
You should use Agency Activity Reference ID: G0001 – Initial Marketing Authorisation Application and Subactivity Text: H002 – “Original Submission”.
Information on the QPPV and PSMF for UK authorised products should be entered in section 2.4.4 of the electronic application form (eAF). You should note the following:
if the QPPV for UK authorised products resides and operates in the UK, the checkbox entitled “The above-mentioned qualified person resides and operates in the EEA” can remain unchecked.
the UK location where the PSMF can be accessed from does not need to be registered in the Article 57 database, therefore the associated checkbox can remain unchecked.
For UK licence applications via mutual recognition or decentralised procedures, the UK SPS should be included in module 1.8.1 as a standalone file or alternatively under a UK subfolder.
Notification of QPPV and PSMF details to the MHRA by existing holders of UK marketing authorisations
You ofshould ownership,supply the newfollowing MAHdocumentation mustin include a copyC.I.8 ofsubmission the(Introduction newof, sPSor underchanges moduleto, 1.8.1
asummaryof thepharmacovigilance COAsystem dossier.for Amedical Typeproducts IAfor C.I.8.ahuman variationuse):
Proof willthat nothe longerapplicant behas requiredat whentheirdisposala newqualified PSMF
isperson introducedresponsible orfor replacedpharmacovigilance becauseand of a Changestatement ofsigned Ownership.
Theby followingthe changesapplicant to the sPSeffect willthat nothe longerapplicant requirehas the submissionnecessary ofmeans ato Typefulfil IA
variationthe totasks updateand theresponsibilities sPSlisted butin canPart11
From 1 January 2021, for products in respect of Northern Ireland (UK-wide and Northern Ireland-only MAs), in addition to notifying the QPPV and PSMF details to the MHRA, you must submit information on the UK QPPV and the EU location of the UK PSMF to the Article 57 database in accordance with Regulation (EC) No 726/2004 Article 57(2).
Pharmacovigilance requirements for UK authorised products webinar recording, which took place on 13 January 2020. This webinar was part of a series of Brexit and post-transition guidance webinars:
This webinar was part of a series of EU Exit and post-transition guidance webinars.
Contact
General queries relating to the QPPV, PSMF and establishment of pharmacovigilance systems for UK authorised products should be sent to gpvpinspectors@mhra.gov.uk
Published 31 December 2020
Last updated 1130 MayNovember 20232021+ show all updates
New guidance has replaced the previous section; 'Notification of QPPV and PSMF details to
the MHRA by existing holders of UK marketing authorisations'. This guidance replaces the previous requirement to submit a Type IA(IN) variation and an accompanying eCTD sequence to make these changes. This has been simplified and only an update notification is required, there is no requirement to submit an eCTD sequence.
1 February 2021
Following user feedback, we have edited some of this guidance to make it easier to understand and clarified certain points.
29 January 2021
New video entry - Pharmacovigilance requirements for UK authorised products webinar recording, which took place on 13 January 2020